Cross Over Restrictors (White)

The Emecole Metro Cross-Over/Back-Flow Restrictor used in concrete crack repair eliminates contamination, metering and re-usage problems associated with dual cartridge dispensing when using dual cartridges without a tongue to separate the two streams as they come out of the cartridges.

Without the tongue, material from one cartridge can easily flow into the adjacent tube rather than fully progressing through the static mixers.

This is referred to as Cross-Over and commonly occurs at the beginning of dispensing and can continue until the pressures are equalized on both tubes. A barrier or “tongue” is common in automated dispensing equipment but not in tube sets.

The Emecole Metro Cross-Over/Back-Flow restrictor can be placed over the “D shaped openings in the neck of Dual cartridges to introduce a “tongue” to the system. In addition, the Restrictor introduces one-way flaps over these tube openings.

These flaps open when pressure is exerted on the tube, but resist material from flowing back into the tubes (either from the adjacent tube or the mixers). This is known as Back-Flow.

Both Cross-Over and Back-Flow contaminate the materials in the cartridges and can lead to improper rationing and premature curing in the cartridges. The latter, in turn, leads to incomplete and possible improper use of products. This also prevents re-using a partially used cartridge set.

The Emecole Metro Cross-Over/Back-flow restrictor is an effective and economical adaptor optimizing the usage and performance of dual cartridges and dual cartridges dispensing for repairing concrete cracks.

Not all Emecole materials require the cross-over/back-flow restrictor. It is included with Emecole materials requiring its use.