Product Description
Emergency Sump Pump Backup System - 443PS (SKU# SEC-443PS)
Made in the USA : Manufactured by SEC America
SEC AMERICA 443PS Pump Sentry™ is designed to operate with a pump whose electrical current draw does not exceed 5A and an external battery whose nominal operating voltage is 12V. Please verify steady state pump current does not exceed 5A.
When electricity is present, Pump Sentry™ charges a 12-volt battery and surveys the power line. At the instant that a power failure occurs, the Pump Sentry converts the energy stored in the battery to AC power to operate your pump. When AC utility power is restored, the Pump Sentry automatically switches your pump back to AC utility power, recharges the battery, and monitors the power line.
Model 443PS maintains the operation of a high‐efficiency sump pump (less than 5A maximum) in the absence of utility power. This helps to prevent residential flooding during rain storms. Model 443PS is a self‐contained emergency backup system including inverter, charger and transfer switch.
Ease of Use:
- Quick Installation
- Backup Battery kicks in immediately when power outage occurs.
- When power returns the 443PS resumes charging its battery preparing for the next outage.
Includes:
- Power Output Indicator
- Battery Charge State Indicators
- Battery Replace Indicator
- Low Battery Audible Alarm
- Battery Cables Included
- 2 Year Factory Warranty
BATTERY REQUIRED (Sold Separately): The single or combined A-Hr. rating of the battery or batteries should not exceed 250 A-hr. A full recharge will take 13 hours for a 100 A-hr. battery and 30 hours for a 250 A-hr. battery. Pump Sentry™ will maintain batteries at full charge while electricity is available.
BATTERY TYPE: Only batteries conforming to Battery Council International (BCI) group size 27 or larger are recommended. Only deep cycle batteries are designed for the type of service which Pump Sentry™ requires. INSTALL ONLY deep cycle batteries. (wet cell or AGM type) The marine-variety is acceptable. DO NOT use car batteries.
BATTERY BOX: Your selected battery(ies) should be installed in a high quality plastic or metal battery box that comes with a lid that is designed for said box.
BATTERY CABLES: Use only the cables that are an integral part of 443PS Pump Sentry™. Do not lengthen said cables by any way. Doing so will cause a degradation in the device performance.
NOTE: Read manual for all installation and safety instructions prior to installation.
Our Recommendations:
See our #1 Selling FASTSUMP 1/3HP Pump, 100AH SLA/AGM Battery and Battery Box below. Click on links below to learn more about our optional recommendations.
Our FastSump Pump 1/3HP (FSS3V-11)